# Samacheer Kalvi Books: Tamilnadu State Board Text Books Solutions

## Samacheer Kalvi 9th Science Chapter 4 Electric Charge and Electric Current Notes PDF Download: Tamil Nadu STD 9th Science Chapter 4 Electric Charge and Electric Current Notes Samacheer Kalvi 9th Science Chapter 4 Electric Charge and Electric Current Notes PDF Download: Tamil Nadu STD 9th Science Chapter 4 Electric Charge and Electric Current Notes

## Samacheer Kalvi 9th Science Chapter 4 Electric Charge and Electric Current Notes PDF Download

We bring to you specially curated Samacheer Kalvi 9th Science Chapter 4 Electric Charge and Electric Current Notes PDF which have been prepared by our subject experts after carefully following the trend of the exam in the last few years. The notes will not only serve for revision purposes, but also will have several cuts and easy methods to go about a difficult problem.

 Board Tamilnadu Board Study Material Notes Class Samacheer Kalvi 9th Science Subject 9th Science Chapter Chapter 4 Electric Charge and Electric Current Format PDF Provider Samacheer Kalvi Books

## How to Download Samacheer Kalvi 9th Science Chapter 4 Electric Charge and Electric Current Notes PDFs?

2. Click on the Samacheer Kalvi 9th Science Notes PDF.
3. Look for your preferred subject.
4. Now download the Samacheer Kalvi 9th Science Chapter 4 Electric Charge and Electric Current notes PDF.

## Tamilnadu Samacheer Kalvi 9th Science Solutions Chapter 4 Electric Charge and Electric Current

### Samacheer Kalvi 9th Science Electric Charge and Electric Current Textbook Exercises

Electric Charge And Electric Current Class 9 Question 1.
In current electricity, a positive charge refers to,………………
(a) presence of electron
(b) presence of proton
(c) absence of electron
(d) absence of proton
(c) absence of electron

9th Science Electric Charge And Electric Current Question 2.
Rubbing of comb with hair ……………………
(a) creates electric charge
(b) transfers electric charge
(c) either (a) or (b)
(d) neither (a) nor (b)
(c) either (a) or (b)

Chapter 4 Electric Charge And Electric Current Question 3.
Electric field lines ………….. from positive charge and ………. in negative charge.
(a) start; start
(b) start; end
(c) start: end
(d) end; end
(b) start; end

Electric Charge And Electric Current Question 4.
Potential near a charge is the measure of its ………… to bring a positive charge at that point.
(a) force
(b) ability
(c) tendency
(d) work
(d) work

9th Standard Science Electric Charge And Electric Current Question 5.
In an electrolyte the current is due to the flow of …………. .
(a) electrons
(b) positive ions
(c) both (a) and (b)
(d) neither (a) nor (b)
(a) electrons

9th Science Chapter 4 Solution Question 6.
Heating effect of current is called
(a) Joule heating
(b) Coulomb heating
(c) Voltage heating
(d) Ampere heating
(a) Joule heating

Electric Charge Match The Following Question 7.
Electroplating is an example for
(a) heating effect
(b) chemical effect
(c) flowing effect
(d) magnetic effect
(b) chemical effect

Question 8.
Resistance of a wire depends on
(a) temperature
(b) geometry
(c) nature of material
(d) all the above
all the above

II. Match the following.

 Column-I Column-II 1. Electric Charge (a) ohm 2. Potential difference (b) ampere 3. Electric field (c) coulomb 4. Resistance (d) newton per coulomb 5. Electric current (e) volt

1. (c)
2. (e)
3. (d)
4. (a)
5. (b)

III. True or False.

Question 1.
Electrically neutral means it is either zero or equal positive and negative charges
True

Question 2.
Ammeter is connected in parallel in any electric circuit
False
Correct Statement: An ammeter is connected in series with a device to measure its current.

Question 3.
The anode in electrolyte is negative
False
Correct Statement: The anode in electrolyte is positive.

Question 4.
Current can produce magnetic field
True

IV. Fill in the blanks.

1. Electrons move from ………….. potential to …………….. potential.
2. The direction opposite to the movement of electron is called ……………….. current.
3. The e.m.f of a cell is analogous to ……………. of a pipe line.
4. The domestic electricity in India is an ac with a frequency of ………… Hz.
5. Trip switch is an …………. safety device

1. higher, lower
2. Conventional
3. a pump
4. 50
5. electromechanical

V. Conceptual questions.

Question 1.
A bird sitting on a high power electric line is still safe. How?
Birds don’t get shocked when they sit on electrical wires because they are not good conductors of electricity. Electricity flowing through a single power line at 35,000 volts will continue along the path of least resistance and bypass birds, because there is no difference in electrical potential.

Question 2.
Does a solar cell always maintain the potential across its terminals constant? Discuss.
The electro-chemical process inside a battery provides electrons at the negative terminal and draws electrons from the positive terminal to maintain the current being drawn. By providing energy to the electrons, the cell is capable of maintaining an electric potential difference across the two ends of the external circuit.

Question 3.
Can electroplating be possible with alternating current?
Electroplating is a process where there is continuous flow of ions for the deposistion of copper, which is not possible in Alternating current. Therefore, electroplating is possible with DC only, for the sake of perfectness and homogeneity of the electroplating.

Question 1.
On what factors does the electrostatic force between two charges depend?
The electrostatic force between two charges depend on the following factors;

• value of charges on them,
• distance between them, and
• nature of medium between them.

Question 2.
What are electric lines of force?
The direction of the electric field is the direction of the force that would act on a small positive charge. Therefore the lines representing the electric field are called ‘electric lines of force’.

Question 3.
Define electric field.
The electric lines of force are straight or curved paths along which a unit positive charge tends to move in the electric field.

Question 4.
Define electric current and give its unit.
Current is the rate at which charges flow past a point on a circuit. Current (I) is represented as, I = qt
The standard SI unit for current is ampere with the symbol A.

Question 5.
State Ohm’s law.
Ohm’s law states that electric potential difference across two points in an electrical circuit is directly proportional to the current passing through it. That is,
V~I
The proportionality constant is tne resistance (R) offered between the two points.
Hence, Ohm’s law is written as,
V = RI (or) V = IR
Where, V is the potential difference in volt (V), I is the current flow in ampere (A), R is the resistance in ohm (Ω)

Question 6.
Name any two appliances which work under the principle of heating effect of current.
The principle of all electric heating appliances like iron box, water heater, toaster etc. work under the principle of heating effect of current.

Question 7.
How are the home appliances connected in general, in series or parallel. Give reasons.
The home appliances are connected in parallel. This is because, when the appliances are connected in parallel, each of them can be switched on and off independently. This is a feature that is essential in a house wiring. Also, if the appliances were wired in series, the potential difference across each appliance would vary depending on the resistance of the appliance.

Question 8.
List the safety features while handling with electricity.
Safety features to be followed are:

• Ground connection
• Trip switch
• Fuse.

VII. Exercises.

Question 1.
Rubbing a comb on hair makes the comb get – 0.4C.
(a) Find which material has lost electron and which one gained it.
The material is comb which gained electrons and the hair gained it.

(b) Find how many electrons are transferred in this process.
Charge on 1 electron, e = 1.6 × 10– 19C
q = ne or n = qe
n = 0.41.6 × 10– 19 = 0.25 × 1019 = 2.5 × 1018

Question 2.
Calculate the amount of charge that would flow in 2 hours through an element of an electric bulb drawing a current of 2.5A.
Given: Time ‘t’ = 2 hours = 2 × 60 × 60s
t = 7200s
I = 2.5A
Amount of charge, Q = I × t
= 2.5 × 7200
Q = 18000C

Question 3.
The values of current I flowing through a resistor for various potential differences V across the resistor are given below. What is the value of resistor?

 I (ampere) 0.5 1 2 3 4 V (volt) 1.6 3.4 6.7 10.2 13.2

[Hint: plot V-I a graph and take slope]. Resistance(R) = $$\frac { ∆V }{ ∆I }$$
= 10.2 – 6.73 – 2 = 3.5/1
R = 3.5Ω

### Samacheer Kalvi 9th Science Electric Charge and Electric Current In Text Problems

Question 1.
How many electrons will be there in one coulomb of charge?
Solution:
Charge on 1 electron, e = 1.6 × 10– 19C
q = ne or n = qe
number of electrons in 1 coulomb = 11.6×10−19 = 6.25 × 1018 electrons

Question 2.
If, 25 C of charge is determined to pass through a wire of any cross-section in 50 s, what is the measure of current? Solution:
I = qt = (20C)50s = 0.5 Cs = 0.5 A

Question 3.
The current flowing through a lamp is 0.2A. If the lamp is switched on for one hour, what is the total electric charge that passes through the lamp?
Solution:
I = qt;q = I × t
1hr = 1 × 60 × 60 s = 3600 s
q = I × t = 0.2A × 3600s = 720C

Question 4.
The e.m.f of a cell is 1.5 V. What is the energy provided by the cell to drive 0.5 C of charge around the circuit?
Solution:
ℰ = 1.5V and q = 0.5C
ℰ = Wq; W= ℰ × q ; Therefore W = 1.5 × 0.5 = 0.75J

Question 5.
A charge of 2 × 104 C flows through an electric heater. The amount of electrical energy converted into thermal energy is 5 MJ. Compute the potential difference across the ends of the heater.
Solution:
V = Wq that is 5 × 106 J2 × 104 C = 250 V

### Samacheer Kalvi 9th Science Electric Charge and Electric Current Additional Questions

Question 1.
What is a positive and a negative ion?
If an electron is removed from the atom, it becomes positively charged. Hence it is called . a positive ion. When an electron is added to an atom, it becomes negatively charged. Hence it is called a negative ion.

Question 2.
Define Electric potential.
Electric potential is a measure of work done on unit positive charge to bring it to that point against all electrical forces. It is represented as ‘V’.

Question 3.
What are the effects of electric current?
When current flows in a circuit, it exhibits various effects. The main effects are; heating, chemical and magnetic effects.

Question 4.
What is resistance?
The resistance (R) is the measure of opposition offered by the component to the flow of electric current through it.

Question 5.
What is common to both direct and alternating current?
Joule’s heating effect of current is common to both direct and alternating current.

Question 6.
What is a trip switch?
It is an electromechanical device which does not allow a current beyond a particular value by automatically switching off the connection.

Question 7.
What are the advantages of AC over DC?
Advantages of AC over DC are;

1.  The voltage of an AC can be varied easily using a transformer.
2.  The AC can be carried over long distances using step up transformers.
3.  The loss of energy while distributing current in the form of AC is negligible.
4.  DC cannot be transmitted as such, but AC can be easily converted to DC.
5.  Generating AC is easier than DC, AC can produce elctromagnetic induction which is useful in several ways.

Question 8.
What is ground connection?
A ground connection is a safety feature. The metal bodies of all electrical appliances are connected to the ground by a third wire, apart from the two wires used for electrical connection. The ground connection wire is green in colour, All the ground wires from various electrical sockets are connected together finally to a thick copper wire, hurried deep in the ground, so that excess current flows down instead of entering our body.

Question 9.
Write a short note on different electrical circuit.
There are two types of electrical circuits – Series circuit and Parallel circuit.

• Series circuit – A series circuit has only one path for electricity to flow from one point to another. The amount of electricity in the circuit is constant throughout the circuit. When electricity flows through the circuit, there will be no fluctuation in its speed.
•  Parallel circuit – A parallel circuit has multiple path for electricity to flow, horizontally and vertically. The components of parallel circuit will have the same voltage across their ends.

Question 10.
What is the difference between electromagnetic force and potential difference?
The e.m.f. refers to the voltage developed across the terminals of an electrical source when it does not produce current in the circuit.

Potential difference refers to the voltage developed between any two points in an electric circuit when there is current in the circuit.

Question 1.
Draw and explain electric circuit diagram. To represent an electrical wiring or solve problem involving electric circuits, the circuit diagrams are made. The four main components of any circuits namely the,

1.  cell,
2.  connecting wire,
3.  switch and
4.  resistor or load are given above. In addition to the above many other electrical components are also used in an actual circuit. A uniform system of symbols has been evolved to describe them. It is like learning a sign language, but useful in understanding circuit diagrams.

Question 2.
What is the magnetic effect of electricity?
A wire or a conductor carrying current develops a magnetic field perpendicular to the direction of the flow of current. This is called magnetic effect of current. The discovery of the scientist Oersted and the ‘right hand thumb rule’ are detailed in the chapter on Magnetism and Electromagnetism in this book. Direction of current is shown by the right hand thumb and the direction of magnetic field is shown by other fingers of the same right hand. Question 3.
Explain fuse. A fuse is another safety mechanism which works on joule heating principle. Fuse is a wire made up of a Nickel and Chromium alloy which has a definite melting point. If current passes through the fuse beyond a particular desired value, the excess heat produced melts the fuse wire, thus the electrical connection is cut-off. Fuse has to be kept in tight a ceramic enclosure to avoid the melting heat from producing fire accidents.

Question 4.
Name any ten symbols with diagram. ## How to Prepare using Samacheer Kalvi 9th Science Chapter 4 Electric Charge and Electric Current Notes PDF?

Students must prepare for the upcoming exams from Samacheer Kalvi 9th Science Chapter 4 Electric Charge and Electric Current Notes PDF by following certain essential steps which are provided below.

• Use Samacheer Kalvi 9th Science Chapter 4 Electric Charge and Electric Current notes by paying attention to facts and ideas.
• Pay attention to the important topics
• Refer TN Board books as well as the books recommended.
• Correctly follow the notes to reduce the number of questions being answered in the exam incorrectly
• Highlight and explain the concepts in details.

## Frequently Asked Questions on Samacheer Kalvi 9th Science Chapter 4 Electric Charge and Electric Current Notes

#### How to use Samacheer Kalvi 9th Science Chapter 4 Electric Charge and Electric Current Notes for preparation??

Read TN Board thoroughly, make separate notes for points you forget, formulae, reactions, diagrams. Highlight important points in the book itself and make use of the space provided in the margin to jot down other important points on the same topic from different sources.

#### How to make notes for Samacheer Kalvi 9th Science Chapter 4 Electric Charge and Electric Current exam?

Read from hand-made notes prepared after understanding concepts, refrain from replicating from the textbook. Use highlighters for important points. Revise from these notes regularly and formulate your own tricks, shortcuts and mnemonics, mappings etc.
Share: